Answer: If you are using it as a grain filler then, yes. I've done that many a time with no problem on open grain woods like Mahogany, then coated with urethane.
Can I sand Solarez?
After the Solarez cures, you can sand it if you want. I usually don't bother sanding mine unless the cured resin is poky or sharp. But I know a lot of you want everything to be perfect, so go ahead and sand it so it's perfectly flush with the rest of your surfboard.
How long does Solarez take to cure?
Solarez UV Resins | Hardens in 3 minutes when exposed to uv sunlight.
Can you use Solarez without sun?
IS SUNLIGHT THE ONLY WAY TO MAKE SOLAREZ® HARDEN? If there is absolutely no sun available, or you need to do repairs indoors, a tanning lamp which uses the relatively safe “UV-A” bulbs will work quite effectively.
Is Solarez a permanent fix?
MFitz73 Well-Known Member. suncure and solarez sun curing products can be used for permanent repair.
19 related questions foundHow do I clean my Solarez?
I had been using isopropyl alcohol, soapy water, lacquer thinner etc. For cleaning up, thinning and removing any tackyness on cured resin, this is the only product you should use.
Can you use Solarez at night?
Re: Can I use Solarez with no sun? Yep with a UV lamp or a sun bed you too can have an artificially developed Melanoma which is just as deadly as the outdoors gained one.
Is Solarez toxic?
HARMFUL IF INHALED. MAY CAUSE ALLERGIC RESPIRATORY REACTION. MAY CAUSE LUNG DAMAGE. MAY CAUSE ALLERGIC SKIN REACTION.
Can you use Solarez on epoxy boards?
Solarez is our #1 recommended epoxy suncare for fixing epoxy resin stand up paddle boards. Simply apply to the surface of your ding and UV rays will harden the resin in minutes.
Will a UV flashlight cure resin?
The resin will cure within 1 to 2 minutes when placed under a UV torch, within 15 minutes in direct sunlight, and within one hour on a cloudy day.
Can UV resin be thinned?
In a short answer, yes, you can do this. Solvents like acetone and alcohol will thin resin once it's mixed. Be sure to add no more than 1 part solvent to 10 parts mixed resin as it may inhibit curing.
How do you fix a broken nose on a surfboard?
fiberglass cloth to cover the fracture. You'll want about an inch and a half of cloth on both sides of the break. Mix together a new concoction of laminating resin and catalyst and apply the mixture with a paint brush or squeegee over the fiberglass, ensuring that you saturate the cloth, but don't drown it.
Can I surf with a ding in my board?
Should you surf with a ding in your surfboard? No, it is not a good idea to surf on a surfboard that has a ding or a crack in it. When there is a crack in the surfboard, water will get into the foam. This will damage the board and make it waterlogged.
How do I know if my surfboard is waterlogged?
Discoloration or Waterlogged: You will want to check the surfboard for signs of yellowed foam or brown spots. This is a sign of water damage and if the board isn't repaired can lead to delaminating and decreased buoyancy of the board.
How can I make my resin flow better?
Method #2: Thinning Epoxy Resin Using a Solvent
Solvents like denatured alcohol, lacquer thinners and acetone. All of these solvents are easily available and also do a great job in lowering the viscosity. Also, these solvents evaporate quickly and are unlikely to become trapped in your cured epoxy resin.
How do you make resin more runny?
The best way to thin out ArtResin epoxy resin is to place the unopened bottles in a warm water bath before you mix. Warming it will alter the viscosity of ArtResin, making it more runny and greatly decreasing the bubbles.
Can a black light cure resin?
You got it Don!! The "blacklights" you are talking about are a useless wavelength for what is needed to cure the resin. Yes, they will EVENTUALLY cure the repair but so will a fluorescent light in the right amount of time.
Can you cure resin with a nail lamp?
You need at least 4 watts to cure your UV Resin. You can use a lamp for nail curing or a UV LED flashlight.
Can I use a grow light to cure resin?
In most cases, light-curing resins cure instantly when exposed to UV light from a light source. UV light can be used to harden particular glues, resins, and inks. It happens by a photochemical reaction that occurs inside the substances and causes them to harden.
Can you use solarez on EPS?
FILLING A DEEP DING THAT INVADES TO THE EPS CORE:
1) If white EPS foam is exposed in any situation, first coat the EPS with Solarez EPOXY (in the blue tube). Allow 2 to 3 minutes for it to cure in good sunlight or with artificial UV light.
How do you fix a crack in a epoxy surfboard?
To repair a cracked surfboard, clean and dry the board, and remove any rotten foam from the cracked area. Sand the crack until the fiberglass layer is exposed. Then, fill the crack with a UV-activated resin, and cover the resin with clear plastic before setting the board in the sun for 5-10 minutes.
Do epoxy surfboards float better?
Floats better. An epoxy surfboard has better buoyancy than a fiberglass board, making it easier to paddle, float, and ultimately catch waves, making them a great choice for those surfers just starting out. Lighter.
