How do I know if my Mevo is on?

Power On for the First Time

When you press and hold the power button for two seconds, the white LED light will pop on, and then start blinking as it initializes. Once it has created its own Hotspot, you will see a pulsing blue light.

How do I turn on my Mevo?

Turn On: Simply press and hold the power button on the top of the camera for around 2 seconds. The battery light will flash indicating the current battery level, then a white boot animation will begin and you will hear a short beep.

What does green light on Mevo mean?

Once you have connected your camera to your Wi-Fi network the light will pulse green, indicating the connection is good. If the connection becomes weaker, the Wi-Fi LED indicator will turn yellow. If there is no connection, it will turn red.

How can I tell if my Mevo start is charging?

You'll be able to tell the status of how full the battery is by the white battery indicator lights on the back of the camera above the power button. When your camera is fully charged it will show four white lights.

How long does it take for Mevo start to charge?

Quick-charge

You should expect to charge the up to 6 hour battery from 0-80% in 1.5 hours. The charger that works for the Mevo Boost is quick-charge capable. The Start is able to be plugged into any charger 24/7 without worry of over or under charging.

43 related questions found

Does Mevo need wifi?

If you do not have a local Wi-Fi network, you can connect your Mevo camera to the Mevo app through the camera's access point (AP) mode, then stream over your mobile device's 4G-LTE connection.

Can Mevo be plugged in?

Yes. The battery life is up to 2 hours on a full charge, and up to 1.5 hours in simulator play.

Can you turn Mevo on remotely?

There is no need to open the Mevo app to enable it as a remote camera. In Livestream Studio, navigate to the Inputs tab. Select Add Input > Remote, then select your camera.

How do I charge my Mevo?

Mevo Boost comes with a USB cable and an AC QuickCharge adapter for charging. Plug the microUSB end of the cable into the microUSB port on the back of the Mevo Boost. Plug the USB-A end of the cable into a USB power supply or into the AC adapter. If using the AC adapter, plug it into an AC outlet.

What is the difference between Mevo start and Mevo Plus?

The battery life of the Mevo Start will last up to 6 hours while the Mevo Plus is only up to one hour or 10 hours with the Mevo boost but again, that's a pretty big extra battery to carry around.

Why is my Mevo flashing blue?

Disconnection. If you lose connection to your network or between your mobile device and the camera, you will see a blinking blue light, followed by a solid red light over the connectivity icon. If this happens, check your local network connection and try connecting again.

Is Mevo start waterproof?

Is Mevo weather or waterproof? Mevo Start is not dust-proof or water-resistant. You should take care to avoid wet or excessively dusty environments.

How do I know when my Mevo Plus is fully charged?

When your camera is not connected to your phone, you may check its battery level by the green light on the back-right of the camera, just above the battery icon. If the battery is above 25% the indicator will be green. If the battery is below 25% the indicator will be red.

Why is my Mevo not connecting?

Turn your mobile device's Bluetooth off, then turn it back on. The camera uses Bluetooth to find nearby devices and check connection/usage status between the mobile device and the camera. If the Bluetooth signal gets interrupted, the communication between devices can fail. Restarting it has resolved this in the past.

How do I connect my Mevo camera to my phone?

Once you are connected to the Mevo's Wi-Fi hotspot, navigate back to the Mevo app. You will then see the card update with a blue Connect button. Tap this to connect the app to your camera.

Can you use Mevo with a laptop?

You can use the Mevo camera as a webcam for your computer/laptop.

Does Mevo have zoom?

Yes – there is a Mevo to Zoom Cloud Meetings workaround that works with the Mevo and Mevo Plus cameras and a Windows computer. However, it may require additional software and has inherent latency (delay) that some may find makes an interactive conversation difficult.

How do you live stream on Mevo?

Once your Mevo camera is connected to the Mevo mobile app, you should notice a red button in the bottom left corner of the picture. Tap it to see more options.
...
Stream to Livestream with the Mevo Camera

Toggle the chat display on and off.
Choose your streaming quality (up to 1080p).
Tap Go Live to start your stream.

How does a Mevo camera work?

The Mevo is very simple to use. Once you connect the camera to your phone and your social media profile, you can start streaming within minutes. The app allows you to cut between medium and close-up shots, and it even smooths out pans and zooms.

Can you use Mevo without a phone?

You must have the Mevo app or Multicam App in order to use the camera. However, once NDI or Webcam Mode modes are enabled the camera can connect and stay connected to your computer without the app running.

How do you turn on Bluetooth on Mevo?

If you launch the Mevo app but do not have Bluetooth enabled, the app will prompt you to turn it on. Tap Settings. You will be redirected to the Bluetooth settings menu. Toggle the switch to On.

How do I put my Mevo in hotspot mode?

To connect your Android to the Mevo camera hotspot mode, make sure the camera is powered on and the LED ring/ light is pulsing blue. Open your Android's Wi-Fi menu and select your camera by it's name-serial number. This will allow you to communicate with your camera via its Wi-Fi hotspot.