What can I use instead of a gummy stone?

A smooth rock, nail file, or even the metal poles of a ski stand will work pretty good for just taking the 'edge' off your edge... as such.

Do you need a gummy stone?

Gummi stones are essential for final stages of sharpening, de-burring and polishing of the steel edges. They are also one of the first things you should get when assembling a ski edge tuning kit.

How do you make gummy stones?

Simply rub the Gummi Stone along the entire length of your ski or board's edge for a smooth finish. Or, just detune your tips and tails, which will reduce the chances of catching an edge, but will keep your side edges ultra-sharp for carving.

What is a gummy stone made of?

Made of finest and highest quality aluminum oxide, rubber impregnated, this stone can remove rust and micro-burrs from your ski and snowboard edges in just a few moves. Used for years by professional ski teams, now it's available to recreational skiers and snowboarders.

When should I use gummy stone?

This soft gummy stone is used for de-burring edges and removing rust from edges of your snowboard or skis. If you like your board or skis to be catch free, de-tune 2" north and south of the contact zones, 4 points of contact. Use a Gummy or a Ceramic Stone.

Should I wet a gummy stone?

They should be used wet in order to preserve the life of the stone. Some people add a tiny bit of washing up liquid to the water in order to better lubricate the stone. Keep them clean by wiping them regularly on a clean rag or some kitchen roll while you're using them.

Where do you detune skis?

So for shaped skis find the contact point of the tip and tail (you can do this by placing the ski on a flat surface and marking the sidewall at the points that the ski contacts the flat surface) and detune from contact point forward on the tip and contact point backward on the tail.

How do you detune skis?

Detuning skis and snowboards is the rounding of the edges on the tip and tail so that the board is not grabby or sticky while on the slopes. To detune your equipment and base bevel, you must use a file or a stone to avoid sharp edges. Overall, it keeps you safer and more comfortable while sliding down the hills.

How do you clean Swix diamond stone?

We recommend water or a 50/50 water/alcohol mix on diamond stones for lubrication and to wash away the ground material. Always rinse your stones with water/alcohol after use. Water/alcohol will remove the metal filings left on the surface that could rust and dries faster than pure water.

What gummy stone makes rust?

Swix Gummy stones are an efficient way to detune (slightly dull) the tip and tail area, and to remove micro-burrs from filing. Features: Grey Gummy - Every person should own one of these soft gummy stones. Great for removing rust and burrs.

What is tuning a snowboard?

Tuning includes waxing, sharpening the edges and a few other things. To tune the board first take off the bindings. This will make the process much easier because the board needs to be flipped upside down. Tuning vices will also make the process much easier, but they are not necessary.

How do you fix rusted ski edges?

Let skis dry individually, as edge to edge contact will promote rusting. If there's rust on the edges, simply rub it off with a gummy stone or some steel wool. Apply a heavy hand wax, and leave it on until you're ready to go skiing again.

What can I use to clean my snowboard base?

Clean Your Base

Use a splash of citrus-based cleaner like One Ball Jay Base Cleaner or Goo Gone, a rag, and some elbow grease to scrub the base clean. Wipe it dry and let it sit for about twenty minutes.

How do you wax skis?

How to Wax Skis & Snowboards

1. Secure the skis or snowboard to your bench. ...
2. Begin dripping wax onto the skis or snowboard. ...
3. Use the iron to spread the wax over the entire ski or snowboard. ...
4. Let the wax cool completely. ...
5. Once cool, you can move on to scraping and brushing the skis or snowboard.

Should you detune tips and tails?

When a new board or pair of skis is given its first tune up, many shops will recommend detuning the contact points to keep the edges from catching unexpectedly and jerking the rider or skier around no matter what they prefer to ride.

Do you need to sharpen new skis?

Skis are sharpened at the factory as part of the assembly process. The edges will have a basic tune on them. Many advanced skiers and racers prefer some bevel and shape to their edges. They will tune new skis before skiing them.

Should you sharpen Park skis?

You should if anything sharpen them more from factory. If you sharpen, then when you hit a rail you will be able to use the angle of the edge to even out and will provide overall more options on the rail, like spinning out as well as just riding out.

How do you edge a snowboard?

Start with the base edge. Applying light pressure, move it smoothly down the board from the nose to the tail. Do this a few times, always in the same direction, ensuring the file is flat on the base while the guide is flush with the side edge. This article is part of The Snowboard Workshop, created with Surfdome.

How do you use a diamond stone on a snowboard?

Start with a 325 to 400-grit diamond stone for side edges, and a 400-grit hard stone for base edges. Use them with a bevel guide and make light overlapping strokes from tip-to-tail. Then repeat the process using finer (600 grit) stones to repeat the same process, finishing with light, full-length tip-to-tail passes.

Do new skis need to be detuned?

You don't have to ride the park to benefit from detuned edges though, as new skis and snowboards often need to be detuned. The reason why is that edges wear down through use, so when a set of skis come from the factory they often have edges that are too sharp.

Can you replace ski edges?

Product Description. For all you mad ski and snowboard surgeons out there who need to replace broken or bent steel edges, we offer these 12-inch (305mm) sections of solid steel edges. The material is quite hard so make sure you have a Dremel or similar rotary tool to cut to the edge to length!

What angle should ski edges be?

To edge your skis using a “Get a Grip”, you must first choose whether you want your edges at 88° or 90°. 90° is sharp enough for beginners and intermediates and most snowboarders but for more advanced skiers go for 88°. Once you decide you should maintain this angle.