What happens if your pool isnt level?

The water will press with more force on one section of the pool than the others. This uneven weight distribution can buckle, twist or even collapse the pool wall, resulting in property damage and injury to anyone in or around the pool when it fails.

How many inches can a pool be unlevel?

Any more than two inches is unacceptable. Intex pools that are three inches off or more will not last and no one should be swimming in one. Not only does it look very bad, once the uneven wall starts to create the outward pressure one side it will eventually push the pool out of shape more and more.

Does a pool have to be perfectly level?

An above ground pool needs to be setup on level ground. Manufactures typically state a pool should be level within an inch, while those who are OCD may try to do even better. An above ground pool that is off level by 3 inches or more is unsafe.

How do you fix an unlevel pool with water in it?

1. Drain some water. You are going to be lifting the lower side of the pool, so you need to get rid of some of the weight. ...
2. Remove blocks. When you installed the pool, you put leveling blocks under the slab. ...
3. Raise the wall. ...
4. Replace blocks. ...
5. Repeat. ...
6. Fill the hole. ...
7. Refill the pool.

Can Intex pool collapse if not level?

Unlevel Intex pools may have one part of the pool lower than other parts, and this unevenly distributes pressure on your pool's walls. A part of your pool may have the highest weight due to it being on uneven ground. This will can cause your wall to collapse and leave permanent damage on your Intex pool.

What can I put under my pool to level it?

Things You Can Put Under Your Pool

• Concrete Pads.
• Commercial Pads.
• Sand.
• Solid Foam.
• Carpet Padding.
• Flooring Underlayment.

How do I know if my pool is ground level?

1. Remove any rocks or debris from the area — you can do this by hand or with a rake.
2. Take two-by-fours and place them on the site. ...
3. Place a level (preferably, one that's several feet long so that will cover more of the two-by-four) on top of the two-by-fours, in the center, to see where the ground is not level.

Can you put a pool on a sloped yard?

The short answer is yes.

By working with professional pool builders and landscapers, you can pursue pool installation even when you're dealing with a slope. However, you'll have to utilize some creativity in order to have the final result be aesthetically pleasing, functional, and safe.

How do I level my Intex pool?

For framed intex pool that is unlevel, you may put a block of wood or concrete underneath the legs of your intex pool to level it. Check for levelness to identify high spots. The 3/4 will work, just make sure your ground is level and smooth. To level ground for a pool, dig away slopes and high spots to make.

Should I put sand under my Intex pool?

For portable pools like the Intex Easy Set Pools, sand is not recommended. Although it's easy to put down and level and it may seem like an ideal material, it can easily erode and get partially washed away in heavy rain.

Should I put pavers under pool legs?

Yes you DO want pavers under your legs. That will keep them from sinking. The pavers need to be level with the ground so they do not poke your liner. The ground prep is a lot of work BUT it will pay off in the end!

How hard is it to install an above ground pool?

You can install an above ground pool in just a few days. You will need the help of few people and can make it a great weekend project for family members and friends. We often get asked if any special tools are required. The answer is no, you do not need any special tools.

How do you Relevel an above ground pool?

Can You Level an Already Up Pool?

1. Drain the above ground pool half-way.
2. Remove the leveling blocks under the lower side.
3. Pry up the wall on the bottom using a shovel to the desired level.
4. Reinstall the blocks.
5. Repeat for all sides of the pool.
6. Add and compact earth under the wall has been jacked up.

What should pool legs be set to?

You SHOULD put a wood block or concrete paver under each leg. The paver should be at least 1ft x 1ft in size and should be level with the ground.

Can you leave an Intex pool up all winter?

In warmer climates, Intex advises to keep your pool up, if you prefer. However, you must winterize the pool when keeping it full throughout the winter. If your area maintains tropical climates all year long, you may not need to winterize your pool at all, especially if you use your pool on a regular basis.

How do I level my ground for a pool without sand?

There is an easy way to do this. Screw two 2-by-4 boards together alongside each other so they are one or two feet longer than the diameter of your pool. Next, lay the attached boards on the ground where the pool will be and put a level on top. Slowly lift and lower one side of the 2-by-4s until it shows level.

Does Intex pool need to be level?

Level ground is extremely important. If it's off by even 1-2 inches, a soft-sided pool can roll toward one side. This puts unnecessary stress on the pool and can lead to a blow-out. Above everything else, this is the most important step in setting up an Intex pool!

Can I put a pool on uneven ground?

Installing a pool on uneven ground creates a safety hazard. You'll end up with a shallow and a deep end, which can be dangerous to smaller children if they cannot touch the bottom.

How do you level the ground for an Intex pool without digging?

Pivot the plank slowly around the pool area, leveling the soil. Continue this until the plank is able to rotate 360 degrees without stopping. Finally, spread a layer of finely crushed limestone over the newly leveled area, and finish it off by wetting, tamping, and leveling it with the plank.