What is SkateSeal?

SkateSeal is a premium quality protective coating specifically formulated for timber skate ramps. SkateSeal was developed for skateboarding with just the perfect amount of grip & slip. SkateSeal provides a hard & fast surface with awesome feel under wheel & will protects your ramp from the elements.

What does Skatepaint do?

What is Skatepaint? A polyurethane epoxy component paint designed specifically for wooden skate ramps. Skatepaint protects the skate ramp from the water, snow and skateboard abuse.

Is Skatelite waterproof?

Fast and super strong, professional grade Skatelite Pro is the supreme riding surface for outdoor skateparks and backyard ramps. The solid material is weatherproof and withstands the constant punishment inflicted by determined riders.

Is Masonite good for skate ramps?

Masonite, in essence, is a glorified cardboard. Its smooth and works great- but if it is going outside, plan on replacing it in a few weeks! Masonite on any skate ramp does not hold up well when it gets wet. It will bubble and be destroyed faster than you can spell s-k-a-t-e-b-o-a-r-d!

What should I paint my skate ramp with?

Two types of paints that work well for this is Spar Urethane and Polyurethane Paint. In addition to painting the ramp, a giant tarp is also a good idea, the last thing you want is water pooling up on your ramp (painted or not).

How do you waterproof a skate ramp?

The standard way to waterproof your ramp is to paint it using a paint designed specifically for use on skate ramps. Coating your deck with paint protects it from various weather conditions such as heat, humidity and sunlight, as well as rain.

How long does Skatelite last outdoors?

Skatelite that has been in place at some parks for over three years and is still in good shape. It has weathered severe winters in a several locations without any ill- effects. If properly installed with sufficient substrate, five to ten years seems reasonable.

Can I paint Skatelite?

Made with paper that is either post consumer waste recycled or sustainably harvested rapidly renewable paper, Skatelite can be used raw or can be painted, custom printed or customised with vinyls. It's also an excellent for making Longboard decks.

How do you bend plywood for a ramp?

Heat the plywood, using your hands to put pressure on it and bend it. Once the wood is bent to the right shape, lay it into your mold and clamp it in place. Then soak towels in water and heat them in the microwave or dip them in boiling water. Lay them on the workpiece and clamp the whole thing together.

What is ramp armor made of?

Unlike the other guys out there, Ramp Armor is more affordably priced and lasts just as long while riding just as good, if not better. Made with high-quality materials and 100% cotton.

How do you cut Skatelite?

Use a thinner kerfed (skinny) - carbide tipped blade for cutting the ramp surfacing and make sure it is very sharp! You don't need to tape the cut line if your blade is sharp and the blade depth is set just a little deeper than 1/4". Since this ramp surfacing is very expensive, make sure your measurements are accurate.

How much does a sheet of Skatelite weigh?

Skatelite comes in three colors: maple, brown, and black. The black Skatelite is made to absorb little or no heat, so it can be used outside. Sheets are available in the standard four-by-eight-foot sizes, and each weigh 50 pounds.

Does OC Ramps use Skatelite?

Pre-Drill Option: Get your Skatelite pre-drilled and countersunk, for a small convenience fee. This special option is only valid for OC Ramps products (sorry DIY ramp builders). It takes the additional headache and hours of drilling away for a small convenience fee.

Can I use plywood for a wheelchair ramp?

Can I use plywood for a wheelchair ramp? For an indoor ramp, plywood might work, but when building a wheelchair ramp outdoors, use pressure-treated lumber.

How long does Skatepaint take to dry?

I applied skate paint with lower temperatures and had a tent which limited airflow. My drying times were a little longer than quoted, but I had 3 dry days to apply and dry and everything worked out great !! 5.0 out of 5 stars Great skate surface for wood ramps!

How thick should plywood be for skate ramp?

For covering the ramp face, we're going to use two layers of 3/8" thick plywood and then a final layer of 1/8" on top. Start by pushing a sheet of 3/8" tight against the coping and screwing it down to the 2x4s below. Repeat it all the way across the ramp, making cuts as needed until the entire thing is covered.

What wood is best for bending?

The species commonly used in industry for making bent members are: White oak, red oak, elm, hickory, ash, beech, birch, maple, walnut, mahogany, and sweetgum.

What is bendy plywood?

Bendy Ply is a unique plywood sheet that has the ability to curve and bend around a tight radius. Its versatility leads to it being widely used in a range of applications such as reception counters, columns and feature displays.

What is Skatelite made of?

Skatelite products are made from a super-durable paper-composite material that is designed to stand up to the daily punishment inflicted by skateboards and BMX bikes.

What are skatepark ramps made of?

The vast majority of skatepark bowls and ramps are made from concrete, and while this is the ideal material due to its smoothness and durability, it is by no means the only suitable construction material. Other options include wood, composite wood, steel, or fiberglass.

What is the best plywood for skate ramps?

The quality of wood dictates how strong and durable the plywood is. For instance, birch has phenomenal surface hardness, therefore birch plywood is one of the best. And a great choice as the riding surface for many indoor ramps.

What wood are skate parks made of?

Wood skateparks include structures built from lumber and plywood but also includes paper-composite products like Skatelite. Steel is another type of commercial product usually sold as a prefabricated kit that is assembled on-site.

What are mini ramps made of?

The ramp is twelve feet wide and three feet tall with a one-foot extension. It's made with wood, and metal coping, with a kaleidoscope paint pattern.

Can I waterproof Masonite?

To avoid structural failure of a piece of installed Masonite, you need to waterproof the surface of the Masonite after installation. Lacquer-based waterproofing systems bond to the surface of the Masonite and provide adequate protection against moisture intrusion.